|
Located in the Ukraine
!!!!A very unique motor yacht for sale!!!!
Please, don't pay attention to external view of the yacht. Our vessel is made of wood that is why it can be fully refitted. The vessel is in running order and even in that state that it is on the picture the yacht is ready to sail. It is not leaky (vessel's hull is made of larch and doesn’t decompose in water, by the way, Venice is built with piles of larch). Estimated cost of restoration not repair will be up to 80 000 US dollars (Ukrainian specialists assessment). This sum is enough to reconstruct the vessel completely as interior articles have preserved their original appearance. If an owner just repairs the vessel, the expenses will be cut by half.
We think that film studios, museums and public organizations might be interested in purchase of our yacht, as she was built for the people who wrote history. It was made in the country which does not exist any more (the USSR) and it was made on request of the organization which doesn't exist any more as well (KGB).
A yacht was constructed by the special project 360, projected in CKB-5 and built at the plant of LNSKH # 5 in Leningrad, in 1961, in the USSR, for the top management of country.
the greatest length – 37.20 m
constructive vater-line – 34.50 m
the width – 7.5 m
the height of the board – 3.4 m
vessel deposit empty – 1.6 m
vessel deposit loaded – 1.8 m
vessel deposit up to screws – 2.3 m
displacement full – 148 tons
displacement empty – 135 tons
speed full – 30.7 knots
speed cruiser – 26 knots
range of swimming – 380 miles
portability – 3 days
crew – 4 persons
passengers – 6 persons
main engine M503A3 – 2 pcs. , the power 400 l/sec, 2000 turns per minute, the factory "ZVEZDA"
The corps of yacht is collected on the transversal system. Space in nasal part to 28 shp. makes 300 mm, further in a stern – 400 mm.
A stem is the pine squared beam of variable section, pasted on a thickness from boards, the keel of variable height is breadthways 240 mm executed on an analogical chart.
Bends, balks and bars of partitions are pasted with laths and boards. External last of the bends are with oak, middle are pine-trees, internal from a larch. Frame bends – steel, double-T and box-type section.
Edging of bottom is three-layered: external – diagonal, from a larch in 16 mm thick, middle diagonal from a pine-tree 10 mm, internal longitudinal from a pine-tree in 16 mm. thick.
The boards consist of two diagonally located layers of pine boards in 16 mm. thick Between the layers of edging for providing of watertightness the layer of fabric, saturated with the special mastic, is fixed.
Partitions are made from birch plywood, and a set and edging of building on and deck-house presents difficult composition from steel, pine-tree and birch plywood.
For connection of elements of construction brass and copper location bracketry was used: screw-bolts, screws, nails. In a motor compartment set two four-stroke, single-acting with the supercharge of diesel of M503A3 (power of 4000 l/s, 2000 ob/min, factory manufacturer «Zvezda») and two diesel – generator, by power 75 and 36 kW (power 150 and 60 l/s, 1500 ob/min, tension of 220V is 50 Hertzs).
The engines are two trilobate mushroom screws by a diameter for 1,11 m.
Contact the listing broker, Mitch Gutcho, for more information
Contact eGlobal Yachts.
|
Featured Boats & Yachts
